How to Fix a Broken Cabinet Frame? | 4 Simple Steps

Cabinet frames are designed to support the weight of the cabinet doors and the contents of the cabinets. Over time, the frames can become damaged or broken, which can cause the doors to sag or the contents of the cabinets to spill out. Mastering  how to fix a broken cabinet frame is not a big thing if you know how to fix household stuff.

If your cabinet frame is damaged or broken, there are a few things you can do to repair it. You can use wood glue to reattach broken pieces of wood. Use a metal patch to cover up holes or cracks in metal frames or use a plastic patch to repair cracks in plastic frames. You also can use elbow grease. 

How to Fix a Broken Cabinet Frame

In this article, We will also provide a list of the tools and supplies you will need. With a little time and effort, you can have your cabinet looking like new again!

What Can Cause a Cabinet Frame to Break?

There are many things that can cause a cabinet frame to break. Some of the most common causes of cabinet frame breakage are:

  • Improperly installed hardware
  • Loose screws
  • Heavy objects resting on top of the cabinet
  • Poorly constructed cabinet

Additional Read: How to Install Bifold Doors Without Bottom Track?

How Do You Repair a Cracked Cabinet Frame?

Cabinet frames are often the first thing to break on a kitchen or bathroom cabinet. If the frame is cracked, it’s not just a cosmetic issue – the frame can become unstable and eventually fall apart. 

There are a few different ways to repair a cabinet frame, and each has its own benefits and drawbacks.

One option is to replace the entire cabinet frame. This is the most expensive option, but it will likely provide the longest-lasting results. However, this may not be a feasible option if you only have a few cabinets in your home.

Repair a Cracked Cabinet Frame

Alternately, you might replace just the components of the frame that are broken. This is a potentially more cost-effective alternative, but it could not have a lifetime that is as lengthy as the replacement choice.

Here are four easy steps to repairing a cracked cabinet frame:

Inspect the frame

Remove the cabinet doors and inspect the frame carefully. If the frame is cracked all the way across, it will need to be replaced.

Use gorilla glue

Apply a small amount of Gorilla Glue to the crack and hold the cabinet frame together for a few minutes until the glue has dried.

Screw the cabinet

Screw the cabinet frame together using screws that are slightly longer than the ones that are currently holding it together. Make sure to use a level to ensure that the screws are evenly spaced.

Final Touch

Once the frame is secured, replace the cabinet doors and enjoy your newly repaired cabinet!

Additional Read: Do you want to clean mold from sliding glass doors?

How Do You Replace a Broken Cabinet Frame?

Broken cabinet frame replacement is costly

When a cabinet frame breaks, it can be a major headache to replace. Not only are the parts expensive, but you also need to be careful not to damage the other cabinets in the kitchen. Here are some tips for replacing a broken cabinet frame:

If you have a broken cabinet frame that is just inside the cabinet, you can try to replace it yourself. You’ll need a wrench, pliers, and a screwdriver. 

First, remove the screws that hold the cabinet frame to the cabinet. 

Then, use the pliers to pull the broken piece of the frame away from the cabinet. 

Finally, use the screwdriver to replace the screws. And also you have to change the cabinet frame at the same time.

How to Fix a Cabinet Face?

You may repair your cabinet face if it is loose, flaking, or damaged in any other manner

If your cabinet face is loose, peeling, or in any other way damaged, you can fix it. This is a basic repair that can be done by most homeowners.

  • Measure the length, width, and height of the cabinet face.
  • Cut the face of the cabinet to the correct measurements.
  • Glue & attach face frame to cabinet using a strong adhesive.
  • Let the adhesive dry.
  • Sand the cabinet face to the desired finish.
  • Paint the cabinet face the desired color.

Tips to Prevent a Cabinet Frame From Breaking

When it comes to protecting your cabinets from breaking, there are a few things you can do. 

Use a cabinet frame protector

A cabinet frame protector can help protect your cabinets from breaking. This type of protector fits over the cabinet frame and helps to prevent the cabinet from moving. 

Use cabinet hardware that is durable

Cabinet hardware made from durable materials can help protect your cabinets from breaking. This type of hardware is often made from metal or plastic and is designed to withstand the weight of the cabinets. Also, you have to know how to align cabinet doors.

Frequently Asked Question 

What tools and supplies will I need to fix my broken cabinet frame?

There are a few tools that are typically required to fix broken cabinet doors. One of these tools is a screwdriver. Other tools that may be required include a wrench, a drill, and a saw.

Is gorilla glue good for fixing cabinets?

Gorilla glue is a strong adhesive, but it’s also quick-drying and has a high bond strength. A lot of people think gorilla glue is a terrible adhesive because it’s so strong. But in some cases, gorilla glue can be a great choice for fixing cabinets.

Final Words

Hopefully now you have no confusion regarding how to fix a broken cabinet frame! Hopefully, this article was able to help you out. 

If your cabinet frame is broken, there are a few things you can do to fix it. You can use wood glue to repair woodworking projects, or you can use a metal bracket to reinforce the frame. You can also try using a piece of wood to splint the frame and then use screws to hold it in place. 

By the way, don’t be panicked if your cabinet doors get cracked. You have efficient ways to fix them.